HOME
products

Vacuum Bubble® Technology Aerator

The Vacuum Bubble® Technology Aerator 200 is best used in applications with high strength waste from commercial operations such as RV and mobile home parks, small industrial sites, restaurants, etc. The VBT™ 200 Series is often used in conjunction with ATU's and Advanced Treatment Systems as an effective pretreatment to significantly lower BOD/TSS concentrations.

VBT™ 200 Specifications

Cubic Feet/Minute(Air) 1.25 VBT Model 300
Model Diagram
Cubic Feet/Day (Air) 1800
Lb. O2/Day 32
Lb. O2/Hp/Hour 5.33
Approximate Flow (Gal/Day)
@ 300 PPM BOD5		 18000
   
Motor Franklin 1/4 Hp
Voltage 1 Phase
Full Load Amps		 115/230
2.8/1.4
   
A:    Motor Diameter 4.17"
B:  Motor Height/1 Phase 7.00"
C:   Motor Mount (Square) 6.75"
D:   Air Tube Length 21.5"
E:   Air Tube Diameter 4.50"
F:    Min Water Line 6.00"
G:    Max Water Line 16.00"

VBT™ 200 Installation PDF


Confined Animal Feed Operations (CAFO)

  • Waste Lagoon Treatment
  • Deep Pit Barn Treatment
  • Flush Water Treatment

Read More

Municipal Wastewater Treatment

  • Aeration Lagoons
  • Solid Waste Separation

Read More

On-Site Wastewater Treatment

  • Pre-Treatment
  • Aerobic Combustion

Read More


Advanced Aeration Inc.'s Vacuum Bubble® Aerators are built upon sound scientific principles and engineering practices. The bubbles are created under a partial vacuum and consequently, as they enter the water, the higher water pressure surrounding them causes them to collapse further. There are no other, documented aerators with bubbles as small as 0.25mm in diameter

Vacuum Bubble® Technology
and Aerobic Bacteria are great for:

  • Conventional Waste Treatment
  • Aerobic Efficiency
  • Nitrification

Read More
Copyright O2 Aeration Technologies, LLC.
Layout and product information © copyright Advanced Aeration, Inc. - All rights reserved.
* Vacuum Bubble® technology is a registered trademark of Advanced Aeration, Inc.
Site maintained by Practical Software Solutions home of the technikatTM.